This is a purely informative rendering of an RFC that includes verified errata. This rendering may not be used as a reference.

The following 'Verified' errata have been incorporated in this document: EID 4664, EID 4707, EID 5474
Internet Engineering Task Force (IETF)                  R. Fielding, Ed.
Request for Comments: 7233                                         Adobe
Obsoletes: 2616                                            Y. Lafon, Ed.
Category: Standards Track                                            W3C
ISSN: 2070-1721                                          J. Reschke, Ed.
                                                              greenbytes
                                                              June 2014


         Hypertext Transfer Protocol (HTTP/1.1): Range Requests

Abstract

   The Hypertext Transfer Protocol (HTTP) is a stateless application-
   level protocol for distributed, collaborative, hypertext information
   systems.  This document defines range requests and the rules for
   constructing and combining responses to those requests.

Status of This Memo

   This is an Internet Standards Track document.

   This document is a product of the Internet Engineering Task Force
   (IETF).  It represents the consensus of the IETF community.  It has
   received public review and has been approved for publication by the
   Internet Engineering Steering Group (IESG).  Further information on
   Internet Standards is available in Section 2 of RFC 5741.

   Information about the current status of this document, any errata,
   and how to provide feedback on it may be obtained at
   http://www.rfc-editor.org/info/rfc7233.

Copyright Notice

   Copyright (c) 2014 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

   This document may contain material from IETF Documents or IETF
   Contributions published or made publicly available before November
   10, 2008.  The person(s) controlling the copyright in some of this
   material may not have granted the IETF Trust the right to allow
   modifications of such material outside the IETF Standards Process.
   Without obtaining an adequate license from the person(s) controlling
   the copyright in such materials, this document may not be modified
   outside the IETF Standards Process, and derivative works of it may
   not be created outside the IETF Standards Process, except to format
   it for publication as an RFC or to translate it into languages other
   than English.

Table of Contents

   1. Introduction ....................................................4
      1.1. Conformance and Error Handling .............................4
      1.2. Syntax Notation ............................................4
   2. Range Units .....................................................5
      2.1. Byte Ranges ................................................5
      2.2. Other Range Units ..........................................7
      2.3. Accept-Ranges ..............................................7
   3. Range Requests ..................................................8
      3.1. Range ......................................................8
      3.2. If-Range ...................................................9
   4. Responses to a Range Request ...................................10
      4.1. 206 Partial Content .......................................10
      4.2. Content-Range .............................................12
      4.3. Combining Ranges ..........................................14
      4.4. 416 Range Not Satisfiable .................................15
   5. IANA Considerations ............................................16
      5.1. Range Unit Registry .......................................16
           5.1.1. Procedure ..........................................16
           5.1.2. Registrations ......................................16
      5.2. Status Code Registration ..................................17
      5.3. Header Field Registration .................................17
      5.4. Internet Media Type Registration ..........................17
           5.4.1. Internet Media Type multipart/byteranges ...........18
   6. Security Considerations ........................................19
      6.1. Denial-of-Service Attacks Using Range .....................19
   7. Acknowledgments ................................................19
   8. References .....................................................20
      8.1. Normative References ......................................20
      8.2. Informative References ....................................20
   Appendix A. Internet Media Type multipart/byteranges ..............21
   Appendix B. Changes from RFC 2616 .................................22
   Appendix C. Imported ABNF .........................................22
   Appendix D. Collected ABNF ........................................23
   Index .............................................................24

1.  Introduction

   Hypertext Transfer Protocol (HTTP) clients often encounter
   interrupted data transfers as a result of canceled requests or
   dropped connections.  When a client has stored a partial
   representation, it is desirable to request the remainder of that
   representation in a subsequent request rather than transfer the
   entire representation.  Likewise, devices with limited local storage
   might benefit from being able to request only a subset of a larger
   representation, such as a single page of a very large document, or
   the dimensions of an embedded image.

   This document defines HTTP/1.1 range requests, partial responses, and
   the multipart/byteranges media type.  Range requests are an OPTIONAL
   feature of HTTP, designed so that recipients not implementing this
   feature (or not supporting it for the target resource) can respond as
   if it is a normal GET request without impacting interoperability.
   Partial responses are indicated by a distinct status code to not be
   mistaken for full responses by caches that might not implement the
   feature.

   Although the range request mechanism is designed to allow for
   extensible range types, this specification only defines requests for
   byte ranges.

1.1.  Conformance and Error Handling

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].

   Conformance criteria and considerations regarding error handling are
   defined in Section 2.5 of [RFC7230].

1.2.  Syntax Notation

   This specification uses the Augmented Backus-Naur Form (ABNF)
   notation of [RFC5234] with a list extension, defined in Section 7 of
   [RFC7230], that allows for compact definition of comma-separated
   lists using a '#' operator (similar to how the '*' operator indicates
   repetition).  Appendix C describes rules imported from other
   documents.  Appendix D shows the collected grammar with all list
   operators expanded to standard ABNF notation.

2.  Range Units

   A representation can be partitioned into subranges according to
   various structural units, depending on the structure inherent in the
   representation's media type.  This "range unit" is used in the
   Accept-Ranges (Section 2.3) response header field to advertise
   support for range requests, the Range (Section 3.1) request header
   field to delineate the parts of a representation that are requested,
   and the Content-Range (Section 4.2) payload header field to describe
   which part of a representation is being transferred.

     range-unit       = bytes-unit / other-range-unit

2.1.  Byte Ranges

   Since representation data is transferred in payloads as a sequence of
   octets, a byte range is a meaningful substructure for any
   representation transferable over HTTP (Section 3 of [RFC7231]).  The
   "bytes" range unit is defined for expressing subranges of the data's
   octet sequence.

     bytes-unit       = "bytes"

   A byte-range request can specify a single range of bytes or a set of
   ranges within a single representation.

     byte-ranges-specifier = bytes-unit "=" byte-range-set
     byte-range-set  = 1#( byte-range-spec / suffix-byte-range-spec )
     byte-range-spec = first-byte-pos "-" [ last-byte-pos ]
     first-byte-pos  = 1*DIGIT
     last-byte-pos   = 1*DIGIT

   The first-byte-pos value in a byte-range-spec gives the byte-offset
   of the first byte in a range.  The last-byte-pos value gives the
   byte-offset of the last byte in the range; that is, the byte
   positions specified are inclusive.  Byte offsets start at zero.

   Examples of byte-ranges-specifier values:

   o  The first 500 bytes (byte offsets 0-499, inclusive):

        bytes=0-499

   o  The second 500 bytes (byte offsets 500-999, inclusive):

        bytes=500-999

   A byte-range-spec is invalid if the last-byte-pos value is present
   and less than the first-byte-pos.

   A client can limit the number of bytes requested without knowing the
   size of the selected representation.  If the last-byte-pos value is
   absent, or if the value is greater than or equal to the current
   length of the representation data, the byte range is interpreted as
   the remainder of the representation (i.e., the server replaces the
   value of last-byte-pos with a value that is one less than the current
   length of the selected representation).

   A client can request the last N bytes of the selected representation
   using a suffix-byte-range-spec.

     suffix-byte-range-spec = "-" suffix-length
     suffix-length = 1*DIGIT

   If the selected representation is shorter than the specified
   suffix-length, the entire representation is used.

   Additional examples, assuming a representation of length 10000:

   o  The final 500 bytes (byte offsets 9500-9999, inclusive):

        bytes=-500

   Or:

        bytes=9500-

   o  The first and last bytes only (bytes 0 and 9999):

        bytes=0-0,-1

   o  Other valid (but not canonical) specifications of the second 500
      bytes (byte offsets 500-999, inclusive):

        bytes=500-600,601-999
        bytes=500-700,601-999

   If a valid byte-range-set includes at least one byte-range-spec with
   a first-byte-pos that is less than the current length of the
   representation, or at least one suffix-byte-range-spec with a
   non-zero suffix-length, then the byte-range-set is satisfiable.
   Otherwise, the byte-range-set is unsatisfiable.

   In the byte-range syntax, first-byte-pos, last-byte-pos, and
   suffix-length are expressed as decimal number of octets.  Since there
   is no predefined limit to the length of a payload, recipients MUST
   anticipate potentially large decimal numerals and prevent parsing
   errors due to integer conversion overflows.

2.2.  Other Range Units

   Range units are intended to be extensible.  New range units ought to
   be registered with IANA, as defined in Section 5.1.

     other-range-unit = token

2.3.  Accept-Ranges

   The "Accept-Ranges" header field allows a server to indicate that it
   supports range requests for the target resource.

     Accept-Ranges     = acceptable-ranges
     acceptable-ranges = 1#range-unit / "none"

   An origin server that supports byte-range requests for a given target
   resource MAY send

     Accept-Ranges: bytes

   to indicate what range units are supported.  A client MAY generate
   range requests without having received this header field for the
   resource involved.  Range units are defined in Section 2.

   A server that does not support any kind of range request for the
   target resource MAY send

     Accept-Ranges: none

   to advise the client not to attempt a range request.

3.  Range Requests

3.1.  Range

   The "Range" header field on a GET request modifies the method
   semantics to request transfer of only one or more subranges of the
   selected representation data, rather than the entire selected
   representation data.

     Range = byte-ranges-specifier / other-ranges-specifier
     other-ranges-specifier = other-range-unit "=" other-range-set
     other-range-set = 1*VCHAR

   A server MAY ignore the Range header field.  However, origin servers
   and intermediate caches ought to support byte ranges when possible,
   since Range supports efficient recovery from partially failed
   transfers and partial retrieval of large representations.  A server
   MUST ignore a Range header field received with a request method other
   than GET.

   An origin server MUST ignore a Range header field that contains a
   range unit it does not understand.  A proxy MAY discard a Range
   header field that contains a range unit it does not understand.

   A server that supports range requests MAY ignore or reject a Range
   header field that consists of more than two overlapping ranges, or a
   set of many small ranges that are not listed in ascending order,
   since both are indications of either a broken client or a deliberate
   denial-of-service attack (Section 6.1).  A client SHOULD NOT request
   multiple ranges that are inherently less efficient to process and
   transfer than a single range that encompasses the same data.

   A client that is requesting multiple ranges SHOULD list those ranges
   in ascending order (the order in which they would typically be
   received in a complete representation) unless there is a specific
   need to request a later part earlier.  For example, a user agent
   processing a large representation with an internal catalog of parts
   might need to request later parts first, particularly if the
   representation consists of pages stored in reverse order and the user
   agent wishes to transfer one page at a time.

   The Range header field is evaluated after evaluating the precondition
   header fields defined in [RFC7232], and only if the result in absence
   of the Range header field would be a 200 (OK) response.  In other
   words, Range is ignored when a conditional GET would result in a 304
   (Not Modified) response.

   The If-Range header field (Section 3.2) can be used as a precondition
   to applying the Range header field.

   If all of the preconditions are true, the server supports the Range
   header field for the target resource, and the specified range(s) are
   valid and satisfiable (as defined in Section 2.1), the server SHOULD
   send a 206 (Partial Content) response with a payload containing one
   or more partial representations that correspond to the satisfiable
   ranges requested, as defined in Section 4.

   If all of the preconditions are true, the server supports the Range
   header field for the target resource, and the specified range(s) are
   invalid or unsatisfiable, the server SHOULD send a 416 (Range Not
   Satisfiable) response.

3.2.  If-Range

   If a client has a partial copy of a representation and wishes to have
   an up-to-date copy of the entire representation, it could use the
   Range header field with a conditional GET (using either or both of
   If-Unmodified-Since and If-Match.)  However, if the precondition
   fails because the representation has been modified, the client would
   then have to make a second request to obtain the entire current
   representation.

   The "If-Range" header field allows a client to "short-circuit" the
   second request.  Informally, its meaning is as follows: if the
   representation is unchanged, send me the part(s) that I am requesting
   in Range; otherwise, send me the entire representation.

     If-Range = entity-tag / HTTP-date

   A client MUST NOT generate an If-Range header field in a request that
   does not contain a Range header field.  A server MUST ignore an
   If-Range header field received in a request that does not contain a
   Range header field.  An origin server MUST ignore an If-Range header
   field received in a request for a target resource that does not
   support Range requests.

   A client MUST NOT generate an If-Range header field containing an
   entity-tag that is marked as weak.  A client MUST NOT generate an
   If-Range header field containing an HTTP-date unless the client has
   no entity-tag for the corresponding representation and the date is a
   strong validator in the sense defined by Section 2.2.2 of [RFC7232].

   A server that evaluates an If-Range precondition MUST use the strong
   comparison function when comparing entity-tags (Section 2.3.2 of
   [RFC7232]) and MUST evaluate the condition as false if an HTTP-date

   validator is provided that is not a strong validator in the sense
   defined by Section 2.2.2 of [RFC7232].  A valid entity-tag can be
   distinguished from a valid HTTP-date by examining the first two
   characters for a DQUOTE.

   If the validator given in the If-Range header field matches the
   current validator for the selected representation of the target
   resource, then the server SHOULD process the Range header field as
   requested.  If the validator does not match, the server MUST ignore
   the Range header field.  Note that this comparison by exact match,
   including when the validator is an HTTP-date, differs from the
   "earlier than or equal to" comparison used when evaluating an
   If-Unmodified-Since conditional.

4.  Responses to a Range Request

4.1.  206 Partial Content

   The 206 (Partial Content) status code indicates that the server is
   successfully fulfilling a range request for the target resource by
   transferring one or more parts of the selected representation that
   correspond to the satisfiable ranges found in the request's Range
   header field (Section 3.1).

   If a single part is being transferred, the server generating the 206
   response MUST generate a Content-Range header field, describing what
   range of the selected representation is enclosed, and a payload
   consisting of the range.  For example:

     HTTP/1.1 206 Partial Content
     Date: Wed, 15 Nov 1995 06:25:24 GMT
     Last-Modified: Wed, 15 Nov 1995 04:58:08 GMT
     Content-Range: bytes 21010-47021/47022
     Content-Length: 26012
     Content-Type: image/gif

     ... 26012 bytes of partial image data ...

   If multiple parts are being transferred, the server generating the
   206 response MUST generate a "multipart/byteranges" payload, as
   defined in Appendix A, and a Content-Type header field containing the
   multipart/byteranges media type and its required boundary parameter.
   To avoid confusion with single-part responses, a server MUST NOT
   generate a Content-Range header field in the HTTP header section of a
   multiple part response (this field will be sent in each part
   instead).

   Within the header area of each body part in the multipart payload,
   the server MUST generate a Content-Range header field corresponding
   to the range being enclosed in that body part.  If the selected
   representation would have had a Content-Type header field in a 200
   (OK) response, the server SHOULD generate that same Content-Type
   field in the header area of each body part.  For example:

     HTTP/1.1 206 Partial Content
     Date: Wed, 15 Nov 1995 06:25:24 GMT
     Last-Modified: Wed, 15 Nov 1995 04:58:08 GMT
     Content-Length: 1741
     Content-Type: multipart/byteranges; boundary=THIS_STRING_SEPARATES

     --THIS_STRING_SEPARATES
     Content-Type: application/pdf
     Content-Range: bytes 500-999/8000

     ...the first range...
     --THIS_STRING_SEPARATES
     Content-Type: application/pdf
     Content-Range: bytes 7000-7999/8000

     ...the second range
     --THIS_STRING_SEPARATES--

   When multiple ranges are requested, a server MAY coalesce any of the
   ranges that overlap, or that are separated by a gap that is smaller
   than the overhead of sending multiple parts, regardless of the order
   in which the corresponding byte-range-spec appeared in the received
   Range header field.  Since the typical overhead between parts of a
   multipart/byteranges payload is around 80 bytes, depending on the
   selected representation's media type and the chosen boundary
   parameter length, it can be less efficient to transfer many small
   disjoint parts than it is to transfer the entire selected
   representation.

   A server MUST NOT generate a multipart response to a request for a
   single range, since a client that does not request multiple parts
   might not support multipart responses.  However, a server MAY
   generate a multipart/byteranges payload with only a single body part
   if multiple ranges were requested and only one range was found to be
   satisfiable or only one range remained after coalescing.  A client
   that cannot process a multipart/byteranges response MUST NOT generate
   a request that asks for multiple ranges.

   When a multipart response payload is generated, the server SHOULD
   send the parts in the same order that the corresponding
   byte-range-spec appeared in the received Range header field,
   excluding those ranges that were deemed unsatisfiable or that were
   coalesced into other ranges.  A client that receives a multipart
   response MUST inspect the Content-Range header field present in each
   body part in order to determine which range is contained in that body
   part; a client cannot rely on receiving the same ranges that it
   requested, nor the same order that it requested.

   When a 206 response is generated, the server MUST generate the
   following header fields, in addition to those required above, if the
   field would have been sent in a 200 (OK) response to the same
   request: Date, Cache-Control, ETag, Expires, Content-Location, and
   Vary.

   If a 206 is generated in response to a request with an If-Range
   header field, the sender SHOULD NOT generate other representation
   header fields beyond those required above, because the client is
   understood to already have a prior response containing those header
   fields.  Otherwise, the sender MUST generate all of the
   representation header fields that would have been sent in a 200 (OK)
   response to the same request.

   A 206 response is cacheable by default; i.e., unless otherwise
   indicated by explicit cache controls (see Section 4.2.2 of
   [RFC7234]).

4.2.  Content-Range

   The "Content-Range" header field is sent in a single part 206
   (Partial Content) response to indicate the partial range of the
   selected representation enclosed as the message payload, sent in each
   part of a multipart 206 response to indicate the range enclosed
   within each body part, and sent in 416 (Range Not Satisfiable)
   responses to provide information about the selected representation.

     Content-Range       = byte-content-range
                         / other-content-range

     byte-content-range  = bytes-unit SP
                           ( byte-range-resp / unsatisfied-range )

     byte-range-resp     = byte-range "/" ( complete-length / "*" )
     byte-range          = first-byte-pos "-" last-byte-pos
     unsatisfied-range   = "*/" complete-length

     complete-length     = 1*DIGIT

     other-content-range = other-range-unit SP other-range-resp
     other-range-resp    = *CHAR

   If a 206 (Partial Content) response contains a Content-Range header
   field with a range unit (Section 2) that the recipient does not
   understand, the recipient MUST NOT attempt to recombine it with a
   stored representation.  A proxy that receives such a message SHOULD
   forward it downstream.

   For byte ranges, a sender SHOULD indicate the complete length of the
   representation from which the range has been extracted, unless the
   complete length is unknown or difficult to determine.  An asterisk
   character ("*") in place of the complete-length indicates that the
   representation length was unknown when the header field was
   generated.

   The following example illustrates when the complete length of the
   selected representation is known by the sender to be 1234 bytes:

     Content-Range: bytes 42-1233/1234

   and this second example illustrates when the complete length is
   unknown:

     Content-Range: bytes 42-1233/*

   A Content-Range field value is invalid if it contains a
   byte-range-resp that has a last-byte-pos value less than its
   first-byte-pos value, or a complete-length value less than or equal
   to its last-byte-pos value.  The recipient of an invalid
   Content-Range MUST NOT attempt to recombine the received content with
   a stored representation.

   A server generating a 416 (Range Not Satisfiable) response to a
   byte-range request SHOULD send a Content-Range header field with an
   unsatisfied-range value, as in the following example:

     Content-Range: bytes */1234

   The complete-length in a 416 response indicates the current length of
   the selected representation.

   The Content-Range header field has no meaning for status codes that
   do not explicitly describe its semantic.  For this specification,
   only the 206 (Partial Content) and 416 (Range Not Satisfiable) status
   codes describe a meaning for Content-Range.

   The following are examples of Content-Range values in which the
   selected representation contains a total of 1234 bytes:

   o  The first 500 bytes:

        Content-Range: bytes 0-499/1234

   o  The second 500 bytes:

        Content-Range: bytes 500-999/1234

   o  All except for the first 500 bytes:

        Content-Range: bytes 500-1233/1234

   o  The last 500 bytes:

        Content-Range: bytes 734-1233/1234

4.3.  Combining Ranges

   A response might transfer only a subrange of a representation if the
   connection closed prematurely or if the request used one or more
   Range specifications.  After several such transfers, a client might
   have received several ranges of the same representation.  These
   ranges can only be safely combined if they all have in common the
   same strong validator (Section 2.1 of [RFC7232]).

   A client that has received multiple partial responses to GET requests
   on a target resource MAY combine those responses into a larger
   continuous range if they share the same strong validator.

   If the most recent response is an incomplete 200 (OK) response, then
   the header fields of that response are used for any combined response
   and replace those of the matching stored responses.

   If the most recent response is a 206 (Partial Content) response and
   at least one of the matching stored responses is a 200 (OK), then the
   combined response header fields consist of the most recent 200
   response's header fields.  If all of the matching stored responses
   are 206 responses, then the stored response with the most recent
   header fields is used as the source of header fields for the combined
   response, except that the client MUST use other header fields
   provided in the new response, aside from Content-Range, to replace
   all instances of the corresponding header fields in the stored
   response.

   The combined response message body consists of the union of partial
   content ranges in the new response and each of the selected
   responses.  If the union consists of the entire range of the
   representation, then the client MUST process the combined response as
   if it were a complete 200 (OK) response, including a Content-Length
   header field that reflects the complete length.  Otherwise, the
   client MUST process the set of continuous ranges as one of the
   following: an incomplete 200 (OK) response if the combined response
   is a prefix of the representation, a single 206 (Partial Content)
   response containing a multipart/byteranges body, or multiple 206
   (Partial Content) responses, each with one continuous range that is
   indicated by a Content-Range header field.

4.4.  416 Range Not Satisfiable

   The 416 (Range Not Satisfiable) status code indicates that none of 
the ranges in the request's Range header field (Section 3.1) overlap
the current extent of the selected representation or that the set of
ranges requested has been rejected due to invalid ranges or an excessive
request of small or overlapping ranges.
EID 4664 (Verified) is as follows:

Section: 4.4

Original Text:

The 416 (Range Not Satisfiable) status code indicates that none of
the ranges in the request's Range header field (Section 3.1) overlap
the current extent of the selected resource or that the set of ranges
requested has been rejected due to invalid ranges or an excessive
request of small or overlapping ranges.

Corrected Text:

The 416 (Range Not Satisfiable) status code indicates that none of
the ranges in the request's Range header field (Section 3.1) overlap
the current extent of the selected representation or that the set of
ranges requested has been rejected due to invalid ranges or an excessive
request of small or overlapping ranges.
Notes:
The overlap may depend on the representation, not only the resource, as is the case with byte ranges.
For byte ranges, failing to overlap the current extent means that the first-byte-pos of all of the byte-range-spec values were greater than or equal to the current length of the selected representation. ^^^^^^^^^^^ When this status
EID 5474 (Verified) is as follows:

Section: 4.4.

Original Text:

For byte ranges, failing to overlap the current extent means that the
   first-byte-pos of all of the byte-range-spec values were greater than
   the current length of the selected representation.

Corrected Text:

For byte ranges, failing to overlap the current extent means that the
   first-byte-pos of all of the byte-range-spec values were greater than
   or equal to the current length of the selected representation.
   ^^^^^^^^^^^
Notes:
If the length of the representation is 500 bytes, then the range of the entire representation is 0-499. Then a range starting at byte position 500 fails to overlap the representation.
code is generated in response to a byte-range request, the sender SHOULD generate a Content-Range header field specifying the current length of the selected representation (Section 4.2). For example: HTTP/1.1 416 Range Not Satisfiable Date: Fri, 20 Jan 2012 15:41:54 GMT Content-Range: bytes */47022 Note: Because servers are free to ignore Range, many implementations will simply respond with the entire selected representation in a 200 (OK) response. That is partly because most clients are prepared to receive a 200 (OK) to complete the task (albeit less efficiently) and partly because clients might not stop making an invalid partial request until they have received a complete representation. Thus, clients cannot depend on receiving a 416 (Range Not Satisfiable) response even when it is most appropriate. 5. IANA Considerations 5.1. Range Unit Registry The "HTTP Range Unit Registry" defines the namespace for the range unit names and refers to their corresponding specifications. The registry has been created and is now maintained at <http://www.iana.org/assignments/http-parameters>. 5.1.1. Procedure Registration of an HTTP Range Unit MUST include the following fields: o Name o Description o Pointer to specification text Values to be added to this namespace require IETF Review (see [RFC5226], Section 4.1). 5.1.2. Registrations The initial range unit registry contains the registrations below: +-------------+---------------------------------------+-------------+ | Range Unit | Description | Reference | | Name | | | +-------------+---------------------------------------+-------------+ | bytes | a range of octets | Section 2.1 | | none | reserved as keyword, indicating no | Section 2.3 | | | ranges are supported | | +-------------+---------------------------------------+-------------+ The change controller is: "IETF (iesg@ietf.org) - Internet Engineering Task Force". 5.2. Status Code Registration The "Hypertext Transfer Protocol (HTTP) Status Code Registry" located at <http://www.iana.org/assignments/http-status-codes> has been updated to include the registrations below: +-------+-----------------------+-------------+ | Value | Description | Reference | +-------+-----------------------+-------------+ | 206 | Partial Content | Section 4.1 | | 416 | Range Not Satisfiable | Section 4.4 | +-------+-----------------------+-------------+ 5.3. Header Field Registration HTTP header fields are registered within the "Message Headers" registry maintained at <http://www.iana.org/assignments/message-headers/>. This document defines the following HTTP header fields, so their associated registry entries have been updated according to the permanent registrations below (see [BCP90]): +-------------------+----------+----------+-------------+ | Header Field Name | Protocol | Status | Reference | +-------------------+----------+----------+-------------+ | Accept-Ranges | http | standard | Section 2.3 | | Content-Range | http | standard | Section 4.2 | | If-Range | http | standard | Section 3.2 | | Range | http | standard | Section 3.1 | +-------------------+----------+----------+-------------+ The change controller is: "IETF (iesg@ietf.org) - Internet Engineering Task Force". 5.4. Internet Media Type Registration IANA maintains the registry of Internet media types [BCP13] at <http://www.iana.org/assignments/media-types>. This document serves as the specification for the Internet media type "multipart/byteranges". The following has been registered with IANA. 5.4.1. Internet Media Type multipart/byteranges Type name: multipart Subtype name: byteranges Required parameters: boundary Optional parameters: N/A Encoding considerations: only "7bit", "8bit", or "binary" are permitted Security considerations: see Section 6 Interoperability considerations: N/A Published specification: This specification (see Appendix A). Applications that use this media type: HTTP components supporting multiple ranges in a single request. Fragment identifier considerations: N/A Additional information: Deprecated alias names for this type: N/A Magic number(s): N/A File extension(s): N/A Macintosh file type code(s): N/A Person and email address to contact for further information: See Authors' Addresses section. Intended usage: COMMON Restrictions on usage: N/A Author: See Authors' Addresses section. Change controller: IESG 6. Security Considerations This section is meant to inform developers, information providers, and users of known security concerns specific to the HTTP range request mechanisms. More general security considerations are addressed in HTTP messaging [RFC7230] and semantics [RFC7231]. 6.1. Denial-of-Service Attacks Using Range Unconstrained multiple range requests are susceptible to denial-of- service attacks because the effort required to request many overlapping ranges of the same data is tiny compared to the time, memory, and bandwidth consumed by attempting to serve the requested data in many parts. Servers ought to ignore, coalesce, or reject egregious range requests, such as requests for more than two overlapping ranges or for many small ranges in a single set, particularly when the ranges are requested out of order for no apparent reason. Multipart range requests are not designed to support random access. 7. Acknowledgments See Section 10 of [RFC7230]. 8. References 8.1. Normative References [RFC2046] Freed, N. and N. Borenstein, "Multipurpose Internet Mail Extensions (MIME) Part Two: Media Types", RFC 2046, November 1996. [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [RFC5234] Crocker, D., Ed. and P. Overell, "Augmented BNF for Syntax Specifications: ABNF", STD 68, RFC 5234, January 2008. [RFC7230] Fielding, R., Ed. and J. Reschke, Ed., "Hypertext Transfer Protocol (HTTP/1.1): Message Syntax and Routing", RFC 7230, June 2014. [RFC7231] Fielding, R., Ed. and J. Reschke, Ed., "Hypertext Transfer Protocol (HTTP/1.1): Semantics and Content", RFC 7231, June 2014. [RFC7232] Fielding, R., Ed. and J. Reschke, Ed., "Hypertext Transfer Protocol (HTTP/1.1): Conditional Requests", RFC 7232, June 2014. [RFC7234] Fielding, R., Ed., Nottingham, M., Ed., and J. Reschke, Ed., "Hypertext Transfer Protocol (HTTP/1.1): Caching", RFC 7234, June 2014. 8.2. Informative References [BCP13] Freed, N., Klensin, J., and T. Hansen, "Media Type Specifications and Registration Procedures", BCP 13, RFC 6838, January 2013. [BCP90] Klyne, G., Nottingham, M., and J. Mogul, "Registration Procedures for Message Header Fields", BCP 90, RFC 3864, September 2004. [RFC2616] Fielding, R., Gettys, J., Mogul, J., Frystyk, H., Masinter, L., Leach, P., and T. Berners-Lee, "Hypertext Transfer Protocol -- HTTP/1.1", RFC 2616, June 1999. [RFC5226] Narten, T. and H. Alvestrand, "Guidelines for Writing an IANA Considerations Section in RFCs", BCP 26, RFC 5226, May 2008. Appendix A. Internet Media Type multipart/byteranges When a 206 (Partial Content) response message includes the content of multiple ranges, they are transmitted as body parts in a multipart message body ([RFC2046], Section 5.1) with the media type of "multipart/byteranges". The multipart/byteranges media type includes one or more body parts, each with its own Content-Type and Content-Range fields. The required boundary parameter specifies the boundary string used to separate each body part. Implementation Notes: 1. Additional CRLFs might precede the first boundary string in the body. 2. Although [RFC2046] permits the boundary string to be quoted, some existing implementations handle a quoted boundary string incorrectly. 3. A number of clients and servers were coded to an early draft of the byteranges specification that used a media type of multipart/ x-byteranges, which is almost (but not quite) compatible with this type. Despite the name, the "multipart/byteranges" media type is not limited to byte ranges. The following example uses an "exampleunit" range unit: HTTP/1.1 206 Partial Content Date: Tue, 14 Nov 1995 06:25:24 GMT Last-Modified: Tue, 14 July 04:58:08 GMT Content-Length: 2331785 Content-Type: multipart/byteranges; boundary=THIS_STRING_SEPARATES --THIS_STRING_SEPARATES Content-Type: video/example Content-Range: exampleunit 1.2-4.3/25 ...the first range... --THIS_STRING_SEPARATES Content-Type: video/example Content-Range: exampleunit 11.2-14.3/25 ...the second range --THIS_STRING_SEPARATES-- Appendix B. Changes from RFC 2616 Servers are given more leeway in how they respond to a range request, in order to mitigate abuse by malicious (or just greedy) clients. (Section 3.1) A weak validator cannot be used in a 206 response. (Section 4.1) The Content-Range header field only has meaning when the status code explicitly defines its use. (Section 4.2) This specification introduces a Range Unit Registry. (Section 5.1) multipart/byteranges can consist of a single part. (Appendix A) Appendix C. Imported ABNF The following core rules are included by reference, as defined in Appendix B.1 of [RFC5234]: ALPHA (letters), CHAR (single character), CR (carriage return), CRLF (CR LF), CTL (controls), DIGIT (decimal 0-9), DQUOTE (double quote), HEXDIG (hexadecimal 0-9/A-F/a-f), LF (line feed), OCTET (any 8-bit sequence of data), SP (space), and VCHAR (any visible US-ASCII character).
EID 4707 (Verified) is as follows:

Section: Appendix C

Original Text:

The following core rules are included by reference, as defined in
Appendix B.1 of [RFC5234]: ALPHA (letters), CR (carriage return),
CRLF (CR LF), CTL (controls), DIGIT (decimal 0-9), DQUOTE (double
quote), HEXDIG (hexadecimal 0-9/A-F/a-f), LF (line feed), OCTET (any
8-bit sequence of data), SP (space), and VCHAR (any visible US-ASCII
character).

Corrected Text:

The following core rules are included by reference, as defined in
Appendix B.1 of [RFC5234]: ALPHA (letters), CHAR (single character),
CR (carriage return),
CRLF (CR LF), CTL (controls), DIGIT (decimal 0-9), DQUOTE (double
quote), HEXDIG (hexadecimal 0-9/A-F/a-f), LF (line feed), OCTET (any
8-bit sequence of data), SP (space), and VCHAR (any visible US-ASCII
character).
Notes:
CHAR is used in Section 4.2 but not mentioned here.
Note that all rules derived from token are to be compared case-insensitively, like range-unit and acceptable-ranges. The rules below are defined in [RFC7230]: OWS = <OWS, see [RFC7230], Section 3.2.3> token = <token, see [RFC7230], Section 3.2.6> The rules below are defined in other parts: HTTP-date = <HTTP-date, see [RFC7231], Section 7.1.1.1> entity-tag = <entity-tag, see [RFC7232], Section 2.3> Appendix D. Collected ABNF In the collected ABNF below, list rules are expanded as per Section 1.2 of [RFC7230]. Accept-Ranges = acceptable-ranges Content-Range = byte-content-range / other-content-range HTTP-date = <HTTP-date, see [RFC7231], Section 7.1.1.1> If-Range = entity-tag / HTTP-date OWS = <OWS, see [RFC7230], Section 3.2.3> Range = byte-ranges-specifier / other-ranges-specifier acceptable-ranges = ( *( "," OWS ) range-unit *( OWS "," [ OWS range-unit ] ) ) / "none" byte-content-range = bytes-unit SP ( byte-range-resp / unsatisfied-range ) byte-range = first-byte-pos "-" last-byte-pos byte-range-resp = byte-range "/" ( complete-length / "*" ) byte-range-set = *( "," OWS ) ( byte-range-spec / suffix-byte-range-spec ) *( OWS "," [ OWS ( byte-range-spec / suffix-byte-range-spec ) ] ) byte-range-spec = first-byte-pos "-" [ last-byte-pos ] byte-ranges-specifier = bytes-unit "=" byte-range-set bytes-unit = "bytes" complete-length = 1*DIGIT entity-tag = <entity-tag, see [RFC7232], Section 2.3> first-byte-pos = 1*DIGIT last-byte-pos = 1*DIGIT other-content-range = other-range-unit SP other-range-resp other-range-resp = *CHAR other-range-set = 1*VCHAR other-range-unit = token other-ranges-specifier = other-range-unit "=" other-range-set range-unit = bytes-unit / other-range-unit suffix-byte-range-spec = "-" suffix-length suffix-length = 1*DIGIT token = <token, see [RFC7230], Section 3.2.6> unsatisfied-range = "*/" complete-length Index 2 206 Partial Content (status code) 10 4 416 Range Not Satisfiable (status code) 15 A Accept-Ranges header field 7 C Content-Range header field 12 G Grammar Accept-Ranges 7 acceptable-ranges 7 byte-content-range 12 byte-range 12 byte-range-resp 12 byte-range-set 5 byte-range-spec 5 byte-ranges-specifier 5 bytes-unit 5 complete-length 12 Content-Range 12 first-byte-pos 5 If-Range 9 last-byte-pos 5 other-content-range 12 other-range-resp 12 other-range-unit 5, 7 Range 8 range-unit 5 ranges-specifier 5 suffix-byte-range-spec 6 suffix-length 6 unsatisfied-range 12 I If-Range header field 9 M Media Type multipart/byteranges 18, 21 multipart/x-byteranges 19 multipart/byteranges Media Type 18, 21 multipart/x-byteranges Media Type 21 R Range header field 8 Authors' Addresses Roy T. Fielding (editor) Adobe Systems Incorporated 345 Park Ave San Jose, CA 95110 USA EMail: fielding@gbiv.com URI: http://roy.gbiv.com/ Yves Lafon (editor) World Wide Web Consortium W3C / ERCIM 2004, rte des Lucioles Sophia-Antipolis, AM 06902 France EMail: ylafon@w3.org URI: http://www.raubacapeu.net/people/yves/ Julian F. Reschke (editor) greenbytes GmbH Hafenweg 16 Muenster, NW 48155 Germany EMail: julian.reschke@greenbytes.de URI: http://greenbytes.de/tech/webdav/